Airport Terminal HVAC Monitoring & Control
Scenario. A terminal building operates large air handling units, chillers and ventilation plant across a wide footprint. Temperature and humidity control must hold steady through large passenger-volume swings.
The challenge
- Terminals run continuously, so control stability matters more than for an office building.
- Plant spans multiple plant rooms with long cable runs between them.
- Existing equipment uses Modbus RTU while the supervisory layer is BACnet.
How the system is built
- Field control: MVC-WMB-1866BA controllers supervise AHUs and ventilation plant. Each controller offers BACnet IP/MS/TP plus two MS/TP and two Modbus RTU channels, 12 analogue inputs, 12 digital inputs and 6 digital outputs, with a 1 ms real-time cycle.
- Programmable I/O: PIOM-843 programmable I/O modules add local PID control in plant rooms, and ZB-IOM-633 ZigBee I/O modules extend sensing and control into areas where new cable runs are impractical.
- Protocol integration: MatyLink QSP-800B gateways map Modbus RTU analogue, binary and value points to BACnet/IP or BACnet MS/TP objects, unifying AI / AO / AV / BI / BO / BV data.
Why it works
Field controllers provide the deterministic control loop at plant level, while gateways let legacy Modbus equipment stay in service and still appear in a single BACnet view.
Products used
MVC-WMB-1866BA intelligent field controller · PIOM-843 programmable I/O module · ZB-IOM-633 ZigBee I/O module · MatyLink QSP-800B gateway