Latest company case about Agricultural Demonstration Park Climate Control
Successful Case
"
Corporate Solutions

Agricultural Demonstration Park Climate Control

2026-07-14

Scenario. A demonstration park combines glasshouses, research buildings and visitor facilities. Growing areas need continuous control of temperature, humidity and air movement.

The challenge

  • Control logic differs between houses, so a fixed-function controller does not fit every zone.
  • Ventilation and circulation fans must respond to both temperature and humidity, not temperature alone.
  • Service buildings and growing areas use different equipment, but the park wants one monitoring view.

How the system is built

  • Programmable control: P-IOM633 programmable I/O modules run the zone control logic. Each module offers 6 analogue inputs, 3 analogue outputs, 6 digital inputs and 3 relay outputs, with PID control and a web configuration interface for tuning on site.
  • Condition sensing: ZB-TnRH temperature and humidity transmitters report conditions across the houses, and Dwyer MS differential pressure transmitters monitor filter and fan pressure.
  • PLC integration: EM-IOM-806 Modbus RTU expansion modules add analogue and digital points to the existing PLC-based control panels.
  • Integration: MatyLink gateways present the whole park through one BACnet interface.

Why it works

Programmable firmware means each house can run its own control logic on identical hardware, and PID control keeps temperature stable as ventilation responds to changing conditions.

Products used

P-IOM633 programmable I/O module · ZB-TnRH temperature & humidity transmitter · Dwyer MS differential pressure transmitter · EM-IOM-806 PLC extension module · MatyLink gateway