University Teaching Buildings - Networked Fan Coil Thermostats
Scenario. Teaching buildings with lecture theatres, seminar rooms and laboratories run fan coil units that must follow a teaching timetable rather than a fixed daily schedule.
The challenge
- Rooms sit empty for long periods but conditioning ran continuously.
- Different room types need different temperature limits – laboratories and lecture theatres have different requirements.
- The estates team needed per-room records without a full BMS replacement.
How the system is built
- Room level: TFHV-SK-FVVMD-S3-CK-M networked fan coil thermostats communicate over Modbus RTU at 9600 bps on an RS-485 bus, with station addresses configured per floor.
- Segment integration: MatyLink QSP-800B gateways bring the RS-485 segments onto BACnet/IP, with capacity for up to 2048 points and four Modbus RTU ports.
- Supervision: MatyContrE provides a browser-based view of the installation, so the estates team can apply timetable-based scheduling and review room temperatures.
Why it works
Because the thermostats are networked rather than standalone, setpoints can follow occupancy. The RS-485 bus keeps installation straightforward, and the gateways mean the room layer integrates with the wider building system instead of becoming another isolated network.
Products used
TFHV-SK-FVVMD-S3-CK-M fan coil thermostat · MatyLink QSP-800B gateway · MatyContrE building automation software