Industry news. Guidance covering liquid cooling in data centres is drawing increased attention from mechanical, electrical and plumbing (MEP) engineers as more facilities move heat rejection from air to liquid.
Why guidance is needed
Air-cooled data centres have long been designed against established temperature and humidity envelopes. Liquid cooling introduces additional variables – coolant chemistry, loop pressure, flow rates, leak detection and the interface between facility water and equipment loops – that fall outside traditional air-side practice.
What engineers are focusing on
- Validating cold plate and CDU performance against recognised guidance before construction rather than after commissioning.
- Instrumentation: the sensor set needed to demonstrate that a loop is operating within its design envelope.
- Integration: making cooling telemetry available to the facility management system, not just the vendor's own controller.
The instrumentation consequence
Compliance is largely a measurement problem. Demonstrating that a loop operates as designed requires reliable temperature, pressure and flow sensing at defined points, plus a path for that data into the monitoring platform.
Source: industry guidance commentary for MEP engineers, 2026.